■ The following diagram is for reference only. The operator should test and check if it is in safe range before lifting up the workpiece of steel. Otherwise, the producer will not assume responsibility for any accidents.
| Form of material | Steel Plate | Round Steel | |||
|---|---|---|---|---|---|
| Model | Max.Lifting Capacity Kg |
Min.Thickness Required mm |
Max.Lifting Capacity Kg |
Maximum Diameter mm |
Maximum Length mm |
| ELM-100 | 100 | 15 | 45 | 150 | 1000 |
| ELM-300 | 300 | 25 | 135 | 250 | 1500 |
| ELM-600 | 600 | 30 | 270 | 350 | 2000 |
| ELM-1000 | 1000 | 40 | 450 | 450 | 2500 |
| ELM-2000 | 2000 | 55 | 900 | 550 | 3000 |
| Model | Capacity(kg) | A mm |
B mm |
C mm |
D mm |
E mm |
F mm |
G mm |
H mm |
Weight (kg) |
Safety Coefficient |
|---|---|---|---|---|---|---|---|---|---|---|---|
| ELM-100 | 100 | 107 | 84 | 120 | 125 | 60 | 71 | 41 | 30 | 2.5 | x 3.5 Times |
| ELM-300 | 300 | 180 | 155 | 156 | 185 | 90 | 93 | 51 | 41 | 8.6 | |
| ELM-600 | 600 | 255 | 224 | 212 | 260 | 115 | 120 | 77 | 52 | 21 | |
| ELM-1000 | 1000 | 280 | 245 | 286 | 371 | 165 | 169 | 97 | 87 | 46 | |
| ELM-2000 | 2000 | 422 | 380 | 348 | 512 | 216 | 215 | 105 | 121 | 118 |
